Hardwood Flooring Installation

Having made the excellent choice to install hardwood flooring in your home, focusing on the process of installation is of significant importance before you start planning that housewarming party to show off your new investment. Being adequately prepared is bound to make the entire process less stressful for both you and your installer.

In general, the installation of any wood flooring is an art. As such, it is imperative that you hire no one but an experienced artist with skills honed from years of experience. Going with a professional installer guarantees an efficient, proper, and beautifully finished installation. If you cannot find a professional hardwood flooring installer in your locality, your specialty flooring retailer might help to coordinate the installation process for you. However, some basic knowledge about the installation of hardwood floors goes a long way towards ensuring you make the right decision. Below are the four primary techniques of installing hardwood floors.1. Nail Down
In this method of installation, the installer will use a mallet, wood flooring nailer, and 2” nailing cleats to attach solid planks of wood that are 3/4″ onto the subfloor. While you can only nail solid planks and strips of wood onto wooden subfloors either on or above grade, adapters are currently available for thinner products.

2. Staple Down
In this technique, the installer will use one and a half to two-inch staples to attach your hardwood flooring onto the subfloor. With a pneumatic gun, you installer drives the staples into the wood and subfloor. Engaging the services provided by a professional helps to guarantee that a suitable staple gun and right size staples are utilized, an important factor since wood flooring manufacturers do not recommend the same staple gun.

3. Glue Down
In this installation technique, the installer will use a fitting trowel to spread adhesive or a natural resin known as mastic, affixing your hardwood to the subfloor. This method is usually used to install parquets and engineered wood floorings since only nailing or stapling down works for the solid strip and plank floors. While a variety of adhesives are currently available on the market, your installer will only use the one specifically recommended for your flooring. Failure to use the adhesive and trowel size recommended by the manufacturer might lead to the voiding of your warranty.

4. Floating
In this method, the hardwood floor isn’t fastened to the subfloor in a mechanical manner. Your installer applies the recommended wood glue in the tongue and groove of every plank after placing a thin pad between the hardwood and subfloor to hold the pieces together. Apart from a fast and easy installation, a floating floor is softer underfoot, protected against moisture, and reduces noise transmission. Floating is possible for all long-strip floors and a few engineered floors. You can learn additional information at Relative Space.

This entry was posted in Business. Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *